IRSN, Institut de radioprotection et de sûreté nucléaire

Search our site :


Contact us :

En Fr

Enhancing Nuclear Safety



Modeling of crack opening and its application to a reactor pressure vessel failure accident.

Vincent Koundy, Michel Durin, Laeticia Nicolas, Alain Combescure, 2002 ASME Pressure vessels and piping conference, 4-8/08/2002, Vancouver, Canada.

Document type > *Congrès/colloque

Keywords > PWR accidents, accident situation, modelling, reactor containment

Research Unit > SEAC (Unit for the study of accidents)

Authors > [et al.], KOUNDY Vincent

Publication Date > 04/08/2002


In order to characterize the timing, mode and size of a possible lower head failure (LHF) of the reactor pressure vessel (RPV) in the event of a core meltdown accident, several large-scale LHF experiments were performed under the USNRC/SNL LHF program. The experiments examined lower head failure at high pressures (10 MPa in most cases) and with small throughwall temperature differentials. Another recent USNRC/SNL LHF program, called the OLHF program, has been undertaken in the framework of an OECD project. This was an extension of the first program and dealt with low and moderate pressures (2 MPa to 5 MPa) but with large throughwall temperature differentials. These experiments should lead to a better understanding of the mechanical behavior of the reactor vessel lower head, which is of importance both in severe accident assessment and the definition of accident mitigation strategies. A well-characterized failure of the lower head is of prime importance for the evaluation of the quantity of core material that can escape into the containment, since this defines the initial conditions for all external-vessel events. The large quantity of escaping corium may lead to direct heating of the containment. This is an important severe accident issue because of its potential to cause early containment failure. The experiments also provide data for model development and validation. For our part, as one of the program partners, numerical modeling was performed to simulate these experiments. This paper presents a detailed description of three of our numerical models used for the simulation. The first model is a simplified semi-analytical approach based on the theory of a spherical shell subjected to internal pressure. The two other methods deal with 2D finite element (2D-FE) modeling: one combines the Norton-Bailey creep law with a damage model proposed by Lemaitre-Chaboche while the other uses only a creep failure criterion but takes into account thermo-metallurgical phase transformations. The numerical results are consistent with the experimental measurements. The effect on the numerical results of the multiphase transformation of the shell material and of the two failure criteria used, one involving necking (Considère's criterion) and the other involving creep damage (Lemaitre-Chaboche), is discussed. This work has been done with the collaboration of the CEA and the INSA/Lyon, France.
Send Print



Send to a friend

The information you provide in this page are single use only and will not be saved.
* Required fields

Recipient's email:*  

Sign with your name:* 

Type your email address:*   

Add a message :

Do you want to receive a copy of this email?